Replacing Backup Hdd - Furuno VR-3000 Operator's Manual

2.6 Replacing Backup HDD

On some vessels several backup HDDs (Type: VR-3011, Code No.:004-385-000, Option) are
carried onboard, replacing one when it is necessary to transport it from the vessel for playback
and extract.
A backup HDD may only be replaced in the follow situations:
1) When the equipment can be powered off; for example, maintenance while in port, etc.
2) An incident has occurred and the Save button on the RAP (VR-3016) was operated to stop
recording.
An HDD may not be re-used for recording once the Save button has been operated. Contact a
FURUNO dealer for further details.
A backup HDD records navigation data for more than past 12 hours (48 hours max.). For longer
recording, use Live Player Backup.
DCU
VR-3010
DRU
VR-5020
Replacing backup HDD
1. Open the DCU with its key. Turn off the
DCU.
2. Pull the knob on the HDD holder to open
the holder.
3. Disconnect IEEE1394 cable from the HDD.
Remove the HDD.
4. Set new HDD to holder.
5. Connect IEEE1394 cable.
6. Push knob on the HDD holder to close the
holder. Turn on the DCU.
7. Confirm that HDD is operating (DCU power
is ON, Save LED is OFF) with no error.
8. Close the DCU and lock it with its key.
9. Refer to the operator's manual of the Live
Player
Pro for how to playback/extract recorded
data from the Backup HDD.
Change
HDD
VR-3011
RAP
VR-3016
AC Adapter
HDD
VR-3011
IEEE1394
(4Pin – 6Pin)
PC for
Playback / Extract
HD
Knob
HDD
IEEE1394
Cable
13