Wren Kitchens Adjustable Corner Base Unit Fittings Manual

FITTING GUIDE
ADJUSTABLE CORNER
BASE UNIT
HEIGHT: 34 1/2"
WIDTH: 36"-42"
DEPTH 24"-25"
B
H H
Page 1
(H) x16 1
1/4
Screws for attaching to walls and worktop are not provided as these vary depending
on materials, thickness and construction. Ensure appropriate fixings for wall and
worktop construction are used. Please refer to the specialist worktop supplier if
Step 1.
Secure each leg into place with 2
"
x screws (B). Ensure legs are
5/8
rotated as shown so that part is
supporting the end panel.
Step 2.
Use 2 x
of the L brackets (K) to the cabinet at
either side.
Sample cabinet shown
Step 4.
Place the shorter packer inside the
cabinet flush with the front edge and
screw through the top and bottom of the
cabinet using 2 x 1
1/4
location.
REQUIRED TOOLS
(B) x30
" Screws
these are required for solid surface worktops.
"
screws (B) to secure each
5/8
"
screws (H) at each
For Internal Use:CON.INS.001.001_50-WKIN0006_BASE_AdjCnr_Rev6
(K) x4 L Bracket - Large
" Screws
5/8
B
K
B
Step 3.
Place the longer packer flush with the
front edge of the cabinet and screw
"
through using 2 x 1
1/4
secure it in place.
screws (H) to
H