Cisco MDS 9500 Series Hardware Installation Manual page 15

New and Changed Information
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 1
Feature
Power supplies Added information on Cisco MDS
Installation of
SFP
transceivers
Additional UK
power cable
Caching
Services
Module (CSM)
Telco and EIA
Shelf Bracket
Kit
Advanced
Services
Module (ASM)
Console port to
modem
Connection
COM1 port to
modem
Connection
Gigabit
Ethernet and
CWDM SFP
transceivers
8-port IP
Storage
Services
(IPS-8) module
Cisco MDS
9506 Director
16-port Fibre
Channel
module
OL-19587-01
Documented Features for the Cisco MDS 9500 Series (continued)
Description
9509 power supplies.
Added instructions for installation and
removal of SFP transceivers and cables.
Added United Kingdom power cable
BS89/13, BS 1363/A, for use with
1900-W power supply.
Added virtualization services for
reallocating physical resources as
virtual resources.
Allowed single-user installation and
installation in a telco rack.
Added support for up to 32 Fibre
Channel ports, provided distributed
intelligent storage services, and
enabled virtualization.
Added support for connecting the
console port on the Cisco MDS 9500
Series to a modem.
Added support for connecting the
COM1 port on the Cisco MDS 9500
Series to a modem.
Added support for Gigabit
Ethernet/Fibre Channel SFP
transceivers and CWDM SFP
transceivers.
Provided FCIP services and iSCSI
services capability in an 8-port Gigabit
Ethernet module.
Added the Cisco MDS 9506 Director, a
multilayer Fibre Channel switch that
supports up to six modules.
Added 16-port Fibre Channel
hot-swappable switching module for
use with the Cisco MDS 9500 Series.
Changed in
Release Where Documented
Not release The
specific MDS 9509 Director in a
Rack" section on page
Not release The
specific and Verifying Supervisor,
Switching, and Services
Modules" section on
page
Not release The
specific page
1.3(1) The
Channel Switching Module"
section on page
Not release The
specific Telco and EIA Shelf Bracket"
section on page
1.2(2a) The
Advanced Services Module"
section on page
1.2(2a) The
Console Port" section on
page
1.2(1a) The
Port" section on page
1.1(1a) The
section on page
1.1(1a) The
Modules" section on
page
1.1(1a) This guide.
1.0(2a) The
section on page
Cisco MDS 9500 Series Hardware Installation Guide
"Installing the Cisco
2-11.
"Removing, Installing,
2-38.
"Power Cords" section on
D-7.
"32-Port 2-Gbps Fibre
1-37.
"Cisco MDS 9000 Family
B-6.
"32-Port Fibre Channel
1-49.
"Connecting to the
3-2.
"Connecting to the COM1
3-4.
"Supported Transceivers"
1-56.
"IP Storage Services
1-47.
"Switching Modules"
1-32.
xv