Advertisement
USER INSTRUCTIONS
for PLUS versions with optional room probe
DUCTED ZONES 2 AND 3 ROOM SET-POINT
The setting can only be made with ducted-air stoves.
If two or more optional room probes are connected and activated, it is possible to set the relative room set-point and
display the room temperature.
After setting the installation room temperature (or with the room power in manual mode), wait 5" without pressing any
button and "SET" will flash then you will exit the settings page.
Otherwise, if you confirm with the
OK button, you can set the room set-point of zone 2 (if the probe is present and
active) indicated on the bottom bar.
34
Press OK to move to the next zone (zone 3), if present, or exit.
UTENTE
Advertisement
