Advertisement
ONLY AUTHORISED PERSONNEL MAY PERFORM THE ELECTRICAL CONNECTIONS.
PERFORM ALL OPERATIONS WITH THE ELECTRICAL POWER SUPPLY DISCONNECTED.
TO CHANGE THE POSITION
POSITION 1
In C you can find as showed in the drawing
•
EXTRACTION OF THE INSERT TO CHARGE , THE PRO-
DUCT COLD
CAUTION:
BEFORE PROCEEDING, MAKE SURE THAT THE
INSERT IS FIXED TO THE BASE.
To extract the insert, proceed as follows:
• Open the door and lift the slide lock (F).
• Attach the handle provided to the two pins fixed to the
lower grille (G) and pull the insert towards you as
far as it will go
INSTALLATION: DUCTABLE FAN
INSTALLER
POSITION 2
V
T1
T2
F
G
FC
15
F
Advertisement
