Advertisement
AUTOMATIC and MANUAL setting
Press the AUTO/MAN button for a few seconds to switch from manual to automatic mode or vice versa.
AUTOMATIC
In AUTOMATIC mode:
Setting of the room temperature (read by the remote control, which should be located in the room where the
product is installed). Modify the desired temperature using the "+" and "–" buttons.
For example: press any button and the display will activate, then press
the button
In MANUAL mode:
Setting of the power
Modify the power level (displayed by the flame symbol) using the "+" and "–" buttons.
For example: press any button and the display will activate, then
press the button
"flame"
symbol
The setting can be confirmed with the
After confirming, SET will stop flashing.
NOTE
With Timer and product "off », it is not possible any regulation (power nor temperature)
USER INSTRUCTIONS
button or by waiting 5" without pressing any button.
USER
MANUAL
31
Advertisement
