Connection To Target System - NEC IE-703002-MC User Manual

3.2 Connection to Target System

There are two connection methods: connecting the connection tab of the optional board to the target system
directly and connecting the connection tab of the option board to the target system via an extension probe (sold
separately).
When the IE-703002-MC is used for developing application systems using V850/Sxx products by connecting an
option board, apply the settings specified in the user's manual of the option board used.
(1) Attach the connector for target connection (NQPACK100SD) and the connector for emulator connection
(YQPACK100SD) to the target system.
Figure 3-8. Connection of Connector for Target Connection and Connector for Emulator Connection
Screws provided with
YQPACK100SD
(YQGUIDE)
Connector for emulator connection
(YQPACK100SD)
Connector for target connection
(NQPACK100SD)
Caution The connector for target connection (NQPACK100SD) has a pin 1 direction marking. Refer to
Figure 3-9.
Figure 3-9. Pin 1 Direction Marking of Connector (Top View)
CHAPTER 3 CONNECTION OF PARTS
<3>
<2>
<1>
Pin 1 direction
Connection tab
of option board
User's Manual U11595EJ5V0UM
<3>
<1> Fix with solder at proper position
<2> Insert
<3> Fix with screws (YQGUIDE)
Target system
Connector for target connection
(NQPACK100SD)
37