Table of Contents
Advertisement
vi.
From the Schedule View select the appropriate Action by clicking on your
schedule' action column
vii.
Click on Save
10.3 Adding a Schedule for Everyday at a Given Time
This type of schedule is run Everyday at a specific time. In order to create this type of
schedule, on the Scheduler Configuration Utility:
i.
Click on the Everyday (at the top left)
ii.
Choose the desired time
iii.
Click on Ok
10.4 Adding a Repeated Schedule for Everyday
This type of schedule is run Everyday at a specific time and is repeated at the desired
interval within the desired duration (less than 24 hours). The desired duration should be
entered at the Repeat Every entry location of the Schedule Configurator. For example the
schedule can run every 15 minutes. In order to create this type of schedule, on the
Scheduler Configuration Utility:
i.
Click on the Everyday (at the top left)
ii.
Click on the Repeats (at the top left)
iii.
Choose the From time
iv.
Choose the To Time
v.
Choose the desired Repeat every interval (at the bottom center)
vi.
Click on Ok
10.5 Adding a Schedule for Certain Days of the Week
This type of schedule is run on Certain Days of the Week at a specific time. In order to
create this type of schedule, on the Scheduler Configuration Utility:
i.
Click on the Every (at the top left)
ii.
Click on the desired Days (on the left)
iii.
Choose the desired time or click on Repeats and choose the desired repeat times
iv.
Click on Ok
10.6 Holding Schedules on a Certain Date
Holding schedules is a powerful mechanism through which the schedules can be put on
hold without the need for removing and adding schedules.
In order to Hold Schedules on a Certain Date on the Scheduler Configuration Utility:
i.
Open the schedule by double clicking it or selecting it from the Schedule View
and clicking Edit
ii.
Click on the Hold (on the lower left)
iii.
Choose the month, day, and year this hold should be applied
iv.
Click on Ok
- 24 -
Advertisement
Table of Contents
