Table of Contents
Advertisement
macros you must click on the Tools menu, then select Macros, then select Security.
Security should be set to either Medium or Low.
7.3.2 Log(Excel)
This option is the same as the Trend – Log menu option.
7.3.3 Reset History
This menu option allows you to reset the information captured in the log file. The
information already captured will be deleted and the log will restart from this point of
time. Once you select this option you will be presented with a confirm request. You may
select OK to proceed and delete the current file or Cancel to exit and the current log will
not be deleted.
7.3.4 Floor Plan
This menu option provides a graphical representation of the location of each device. It
allows you to create locations (rooms) and place devices in their physical location. This
will help if at a later time you would like to know where the specific device you are
controlling is located.
Once you select this option you will be presented with a new window. It will have a Key
icon at the top. By selecting the key you will be presented with the option of creating a
new location. You may name it any name which helps correlate this graphical
representation to the physical location. You can click and drag a group of devices First
Floor to the Floor plan. The system will create a new room in the floor plan which will
contain all the devices that are part of the First Floor group. You can then click and drag
each device to its physical location within that room. For example: Hall 1 can be dragged
to the top left of the room because that's its physical location.
7.4
Help Menu
See Figure 9 for all Help Menu options.
Figure 9– Help Menu
7.4.1 About
The About menu option will provide the current IP, port and ISY version number that the
control system is using. It will also provide the status of the internet access, whether it is
enabled or disabled. Internet access can be changed on the File menu.
- 15 -
Advertisement
Table of Contents
