Table of Contents
Advertisement
11. Left Pane – Triggers
Triggers View, See Figure 22, allows for the configuration of actions and notifications
based on certain events within the controller devices. Just like the Schedules, Triggers
may be applied either globally (on all the devices on all the ISY) or locally on a specific
device.
Figure 22– Triggers
11.1 Setting a Trigger
To set a trigger:
i.
Click the New Trigger button (on the upper left)
ii.
Click the New Condition button – this will cause a new view to open up and allow
you to select the new condition. For example: When Hall 1 is on
iii.
Click the New Response button – this will cause a new view to open up and allow
you to select the reaction to the condition you just selected. For example: Set Hall
3 to On.
iv.
Click the Apply Trigger button (on the upper left)
v.
You can now either follow the same process to enter another trigger or click the
Save button
You can select multiple condition and multiple responses as part of the same trigger. For
example:
Conditions
If Hall 1
and Hall 2 are On
Responses
Turn Hall 3 On
Notify - This will notify all the contacts listed in the configurations view
and will follow the rules for the notifications (such as max three
notifications.)
- 26 -
Advertisement
Table of Contents
