Table of Contents
Advertisement
in the following subsections. After you selected the location and time in the Schedule
Configurator, click OK. You will be back in the Schedule View. Please select your
schedule and click on the Action column, you will be presented with a drop down menu
from which you should select the desired action.
Please press the Save button at the bottom center of the schedules view.
Figure 21- Schedule Configurator
Note: You can add all the desired schedules before saving them to the ISY for execution.
When you are done with creating all the desired schedules, click on the Save button at the
bottom of the Schedules View.
10.2 Adding a Schedule for a Specific Time
This type of schedule is run only Once at a specific date and time. In order to create this
type of schedule, on the Scheduler Configuration Utility:
i.
Click on the Once (at the left top)
ii.
Choose the desired time
a.
Either enter the time manually
Select Sunset or Sunrise and the correlating time, based on your location,
b.
will be entered for you by the ISY
iii.
Choose the desired date
Select the month by using the arrows at the bottom left and bottom right
a.
b.
Select the day by clicking on the correlating number button, the selected
day will appear in red text
iv.
Choose the location from the drop down menu at the top
v.
Click on Ok
- 23 -
Advertisement
Table of Contents
