View Pane; Bottom Pane - Universal Devices ISY-26 User Manual

At the top of the tree view you have: Configuration, Schedules and Trigger. The bottom
section of the tree view offers a configurable view of all the devices you can control.
Clicking on the icons on the tree view brings up the associated view in the view pane.
Right clicking on the icons on the tree view brings up a menu of actions appropriate only
for that node on the tree.
6.3

View Pane

The View Pane is located in the main and right sections of the GUI. The view pane
provides a tabulation of all the pertinent and important information for all the devices you
can control in one place. It is specifically designed to give you an immediate access to
most needed information during setup while providing simple navigation features enable
the user to jump to a device (such as light) to perform necessary actions.
The view is displayed when any of the following nodes are selected:
i. Root Node – in this view, all the devices in the network are captured regardless of
their physical attachment to any ISY.
ii. Physical Device (ISY) Node – in this view, only those devices that are attached
to the selected ISY are presented.
iii. Group Node – in this view, only those devices that are attached to the selected
group are presented.
The View Pane provides a very useful and intuitive navigation (refer to Figure 5)
mechanism: when a specific row in the table is clicked:
i. The respective device is selected in the Tree View
ii. The view is changed to show the details related to that device and the user can
immediately change the settings for that device.
6.4

Bottom Pane

The Bottom Pane is located at the bottom section of the GUI. Depending on the option
selected on the Tree View it will contain the actions you can perform. If you selected a
device in the View Pane or the Tree View; the Bottom Pane will show the actions you
can perform to the device and the groups this device belongs to.
- 11 -