Table of Contents
Advertisement
Note: A Hold schedule at the highest level for location (ISY) will put all the schedules
for all the devices in all the ISY in the network on hold.
10.7 Holding Schedules for a Duration
Holding schedules is a powerful mechanism through which the schedules can be put on
hold without the need for removing and adding schedules. Not only you can Hold
schedules for a Certain Date, you can also Hold schedules for a Duration of time.
In order to Hold Schedules for a Duration of time, on the Scheduler Configuration
Utility:
i.
Click on the Hold (at the bottom left)
ii.
Click on the Repeats (at the upper left)
iii.
Choose From and enter the desired date and time for the start of the hold
iv.
Choose To and enter the desired date and time for the end of the hold
v.
Click on Ok
10.8 Editing an Existing Schedule
To select an existing schedule simply click on it. The schedule's row will turn pink and
you can make changes to the actions by clicking on the Action's entry for the selected
schedule. You will be presented with a drop down menu from which you can select the
desired action. To edit additional features of this schedule you can click on it once and
select the Edit button or double click on the schedule. Please make sure you click the
Save button in the Schedules view after you completed your changes otherwise your
changes will not be saved on the ISY and will not take effect.
10.9 Removing a Schedule
Some schedules – such as those created for a Specific Time – become inactive once
executed. Or, there might be the necessity for removing a schedule that is no longer
required. In these cases, all one has to do is to click on the row containing the schedule
and then clicking on the Remove button on the Schedules View.
To remove all schedules simply click on the Remove All button on the Schedules View.
- 25 -
Advertisement
Table of Contents
