Table of Contents
Advertisement
3. ELECTRICAL INSTALLATION.
3.1. DC (DIRECT CURRENT) INSTALLATION
Make sure the inverter's isolator switch is in the OFF
position.
Make sure the protection systems in the junction box are
activated and that there is no voltage in the cables you are
going to handle.
Connecting the solar park cables:
Material required:
1.
Unscrew the MC4 connectors (supplied) and prepare the cables coming from the junction box of the solar park:
2.
Pass the cables through the screw caps, crowns and rubber seals, as shown below. Then crimp the metal terminals to the cables.
QUICK GUIDE
To ensure an optimum
connection, use an
approved tool to
crimp the terminals.
7
EQUINOX - SOLAR INVERTERS
Advertisement
Table of Contents
