Table of Contents
Advertisement
4. ON/OFF SEQUENCE.
Danger of electric arc. Do not open any DC isolator switches if the device is charging.
Follow the steps below in order to start up the inverter:
1.
Activate the inverter's isolator switch and place it in the ON position.
2.
Make sure the solar park is connected. Activate the protections in order to enable the photovoltaic supply.
3.
Make sure there is mains voltage. Activate the protections in order to enable the mains supply. Without a mains supply, the device
will not enter generation mode.
4.
The device will start up. The LCD screen will turn on. The following section details the steps to follow and explains how the console
works.
Follow the steps below in order to stop the inverter and switch it off:
1.
Shut off the mains power supply. Without a mains supply, the device will stop generating.
2.
Shut off the solar park power supply. Activate the protections in order to shut off the photovoltaic supply.
3.
Deactivate the inverter's isolator switch and place it in the OFF position.
4.
The device will stop. When the internal capacitors of the DC bus are without voltage, the LCD screen will turn off.
14
ON
ON
OFF
SALICRU
Advertisement
Table of Contents
