Editing Patterns (Embroidery Settings Screen) - Brother 888-K80 Operation Manual

Display
No.
Key Name
3
Touch this key to change the font of the
selected characters.
Font key
Depending on the font that was selected,
it may not be possible to change the
font.
4
Touch this key to switch between text
written vertically and horizontally.
Vertical/horizontal
(Japanese font only)
text key
5
Touch this key to edit each character
separately.
Edit character key
When touching
character by using
the size.
When touching
character by using
the font.
6
Touch this key to split text between
characters so that they can be edited
Split text key
separately.
Use
pattern is to be separated, and then
touch
Any pattern that is split cannot be
recombined.
7
Touch this key to change the spacing of
character patterns.
Character spacing
key
Touch
the character spacing.
Touch
original appearance.
8
When a combined pattern is selected,
use this key to select a part of the pattern
Select key
to edit. The selected pattern is outlined
by the red box. If the line feed key was
used while entering text, single lines can
be selected.
Explanation
, select the
to change
, select the
to change
to select where the
to separate it.
/ to increase or decrease
to return the pattern to its

Editing Patterns (Embroidery Settings Screen)

Editing Patterns (Embroidery Settings
Screen)
When is touched in the editing screen, the
embroidery settings screen appears. After editing the
pattern, touch to continue to the embroidering
screen.
■ Embroidery settings screen
7 6 5
Display
No.
Key Name
1
Touch these keys to move the pattern in
the direction shown by the arrow.
(Touch the center key to return the
Move key
pattern to the center of the embroidery
area.) (page 44)
2
Touch this key to rotate the entire
pattern.
Rotate key
Touch
original position.
3
Touch this key to rearrange the stitching
sequence for combined patterns.
Color sorting key
4
Touch this key to enter the embroidery
screen.
Embroidery key
5
Touch this key to save patterns to the
machine's memory or USB flash drive.
Memory key
Patterns can also be transferred to a
computer via wireless network
connection. (page 46)
6
Touch this key to check the position of
the pattern. (page 34)
Trial key
7
Touch this key to move the needle start
position to align the needle with the
Starting point key
pattern position. (page 44)
1
2
3
4
Explanation
to return the pattern to its
43
2