Adjusting Thread Tension - Brother 888-K80 Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

Embroidering

■ If the thread breaks or the bobbin runs out of

thread during embroidering

Press the "Start/Stop" button to stop the machine.

Touch

and thread the upper thread or install the

bobbin thread again.

• If the bobbin thread is almost empty, press

(Thread cutter button) to cut the upper and bobbin

threads, remove the embroidery frame, and then

replace the bobbin with one wound with thread.

Touch

, or

correct number of stitches before the area where the

thread broke, and then touch

• Touch

to restart from the beginning.

Memo

• If you cannot move back to the area where the

thread broke, touch

move to the beginning position of that color, then

use

before where the thread broke.

Lower the presser foot and press the "Start/Stop"

button to continue embroidering.

■ Resuming embroidery after turning off the

power

The current color and stitch number are saved when

embroidery is stopped. The next time the machine is

turned on, you have the option to continue or delete the

pattern.

to move the needle back the

to select the color and

to move ahead to slightly