Editing Patterns (Embroidery Settings Screen); Aligning The Pattern And The Needle Position - Brother 888-P00 Installation And Operation Manual

Editing Patterns (Embroidery Settings Screen)

Editing Patterns (Embroidery Settings
Screen)
When is touched in the editing screen, the
embroidery settings screen appears. After editing the
pattern, touch to continue to the embroidering
screen.
■ Embroidery settings screen
6 5 4
Display
No.
Key Name
1
Touch these keys to move the pattern in
the direction shown by the arrow.
(Touch the center key to return the
Move key
pattern to the center of the embroidery
area.) (page 80)
2
Touch this key to rotate the entire
pattern.
Rotate key
Touch
original position.
3
Touch this key to enter the embroidery
screen.
Embroidery key
4
Touch this key to save patterns to the
machine's memory or USB flash drive.
Memory key
Patterns can also be transferred to a
computer via wireless network
connection. (page 82)
5
Touch this key to check the position of
the pattern. (page 71)
Trial key
6
Touch this key to move the needle start
position to align the needle with the
Starting point key
pattern position. (page 80)
80
1
2
3
Explanation
to return the pattern to its

Aligning the pattern and the needle position

Example: Aligning the lower left side of a pattern and the
needle position
a Mark the embroidery start position on the fabric, as
shown.
b Touch .
c Touch and touch
1
1 Start position
 The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).
Use to align the needle and the mark on the
d
fabric, touch and begin embroidering the pattern.
.