Editing Patterns (Embroidery Settings Screen) - Brother 888-M36 Operation Manual

■ Font editing screen
Font editing screen appears by pressing
editing screen.
1 2 3 4
7 8
Display
No.
Key Name
1
Press this key when you want to change
the thread color, character by character
Multi color key
in character embroidery. Since the
machine stops at the end of each
character, the upper thread is changed
as you embroider. Press this key again to
cancel setting.
2
Press this key to change the
configuration of a character pattern.
Array key
When selecting an arc (
), use
degree of the arc.
: Make the arc flatter.
: Make the arc rounder.
When selecting
change to
increase or decrease the incline.
To arrange the spacing between the
character patterns on the line, press
.
3
Press this key to change the font of the
selected characters.
Font key
Depending on the font that was selected,
it may not be possible to change the
font.
4
Press this key to switch between text
written vertically and horizontally.
Vertical/horizontal
(Japanese font only)
text key
5
Press this key to edit each character
separately.
Edit character key
When pressing
by using
When pressing
by using
on the pattern
5
6
Explanation
and to change the
, and
and . You can
, select the character
to change the size.
, select the character
to change the font.

Editing Patterns (Embroidery Settings Screen)

Display
No.
Key Name
6
Press this key to split text between
characters so that they can be edited
Split text key
separately.
Use
pattern is to be separated, and then
press
Any pattern that is split cannot be
recombined.
7
Press this key to change the spacing of
character patterns.
Character spacing
key
Press
the character spacing.
Press
original appearance.
8
When a combined pattern is selected,
use this key to select a part of the pattern
Select key
to edit. The selected pattern is outlined
by the red box. If the line feed key was
used while entering text, single lines can
be selected.
Editing Patterns (Embroidery Settings
Screen)
When is pressed in the editing screen, the embroidery
settings screen appears. After editing the pattern, press
to continue to the embroidering screen.
■ Embroidery settings screen
6 5 4
Display
No.
Key Name
1
Press these keys to move the pattern in
the direction shown by the arrow. (Press
the center key to return the pattern to
Move key
the center of the embroidery area.)
(page 34)
Explanation
to select where the
to separate it.
/ to increase or decrease
to return the pattern to its
1
2
3
Explanation
33
2