Table of Contents
Advertisement
Editing Patterns (Embroidery Settings
Screen)
When
is pressed in the editing screen, the embroidery
settings screen appears. After editing the pattern, press
to continue to the embroidering screen.
■ Embroidery settings screen
6 5 4
Display
No.
Key Name
1
Press these keys to move the pattern in
the direction shown by the arrow. (Press
the center key to return the pattern to
Move key
the center of the embroidery area.)
(page 75)
2
Press this key to rotate the entire
pattern.
Rotate key
You can rotate a pattern one degree, ten
degrees or ninety degrees at a time.
Press
original position.
3
Press this key to enter the embroidery
screen.
Embroidery key
4
Press this key to save patterns to the
machine's memory or USB flash drive.
Memory key
(page 77)
5
Press this key to check the position of
the pattern. (page 67)
Trial key
6
Press this key to move the needle start
position to align the needle with the
Starting point key
pattern position. (page 75)
1
2
3
Explanation
to return the pattern to its
Editing Patterns (Embroidery Settings Screen)
Aligning the pattern and the needle position
Example: Aligning the lower left side of a pattern and the
needle position
a
Mark the embroidery start position on the fabric, as
shown.
b
Press
.
c
Press
and press
1
1 Start position
The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).
Use
to align the needle and the mark on the
d
fabric, press
and begin embroidering the pattern.
.
75
4
Advertisement
Table of Contents
