Table of Contents
Advertisement
Names of Machine Parts
■ Embroidery unit
1 Frame-securing lever (page 29)
2 Embroidery unit connection (page 25)
3 Carriage (page 25)
4 Release button (page 26)
■ Operation buttons
a
1 "Start/Stop" button
Press the "Start/Stop" button to start or stop embroidering.
The button changes color according to the machine's
operation mode.
Green:
The machine is ready to embroider or is
embroidering.
Red:
The machine cannot embroider.
Orange:
The machine is winding the bobbin thread, or
the bobbin winder shaft is moved to the right
side.
2 Needle position button
Press the needle position button to raise or lower the needle.
3 Thread cutter button
Press the thread cutter button after embroidering is stopped to
cut both the upper and the bobbin threads.
10
b c
■ Operation panel and operation keys
1 LCD (liquid crystal display) (touch panel)
Selected pattern settings and messages are displayed.
Touch the keys displayed on the LCD to perform operations.
For details, refer to "LCD Operation" on page 12.
2 Previous page key
Displays the previous screen when there are items that are not
displayed on the LCD.
3 Next page key
Displays the next screen when there are items that are not
displayed on the LCD.
4 Help key
Touch to get help on using the machine.
5 Settings key
Touch to set the needle stop position, the buzzer sound, and
more.
6 Embroidery key
Touch to display the pattern type selection screen.
7 Back key
Touch to return to the previous screen.
8 Presser foot/Needle exchange key
Touch this key before changing the needle, the presser foot,
etc. This key locks all key and button functions to prevent
operation of the machine.
Note
• The operation keys of this machine are capacitive
touch sensors. Operate the keys by directly
touching them with your finger.
• Since the operation keys react differently
depending on the user, adjust the setting for
"Adjusting input sensitivity for operation keys" on
page 14.
• When using an electrostatic touch pen, make sure
that its point is 8 mm or more. Do not use a touch
pen with a thin point or a unique shape.
Advertisement
Table of Contents
