Table of Contents
Advertisement
d
Lower the presser foot, then press the "Start/Stop"
button to start embroidering.
After 5-6 stitches, press the "Start/Stop" button again
to stop the machine.
Note
• Make sure that there are no objects within the
moving area of the embroidery frame. If the
embroidery frame hits another object, the pattern
may become misaligned.
e
Trim the excess thread at the end of the seam. If the
end of the seam is under the presser foot, raise the
presser foot, then trim the excess thread.
• If the thread is left at the beginning of the stitching, it
may be embroidered over as you continue
embroidering the pattern, making it very difficult to
remove the excess thread after the pattern is finished.
Trim the thread at the beginning.
f
Press the "Start/Stop" button to start embroidering.
Stitching stops automatically with reinforcement after
one color has been completed. When automatic
thread cutting is set, the thread is cut.
Remove the thread for the first color from the
g
machine.
h
Repeat the same steps for embroidering the remaining
colors.
When the last color is embroidered, a message
informing you the embroidering is finished will
appear on the display. Touch
will return to the initial screen.
i
■ Changing the thread color display
You can display the name of the thread colors or
embroidery thread number.
a
b
c
d
, and the display
Cut the excess thread jumps within the color.
Memo
• Colors on the screen may vary slightly from actual
spool colors.
• The default thread brand is set to [Original].
Imported embroidery data is displayed with the
thread brand specified in the embroidery editing
software.
Touch
and use
or
settings screen.
Use
or
of the
Color] or [#123] (thread number).
• When [Name of Color] is selected, the name of the
thread colors is displayed.
• When [#123] is selected, the embroidery thread
number is displayed.
Use
or
of the
brand.
Memo
• The thread brand setting will be applied with the
next pattern that is loaded.
Touch
.
Embroidering
to display the following
menu to select [Name of
menu to select the thread
35
2
Advertisement
Table of Contents
