Application And Function - Schaudt DT 220 B Instruction Manual

Modules
830.588 BA / EN
DT 220 B control and switch panel instruction manual
DANGER!
Y
Incorrect installation!
Electrical shock or damage to the connected device:
The device must be installed in accordance with the installation
F
instructions.
WARNING!
Y
Hot components!
Burns:
Blown fuses may only be changed after the power to the system has
F
been disconnected.
Blown fuses may only be replaced when the cause of the fault is
F
known and eliminated.
Never bypass or repair fuses.
F
The back of the device can get hot during operation. Do not touch.
F
Only use original fuses rated as specified on the device.
F
3

Application and function

The DT 220 B control and switch panel is the central operating unit for the
EBL ... Electrobloc, which supplies all of the 12 V electrical supply's consu-
mers onboard the motorhome or caravan. It is usually installed in an easily
accessible spot that is high up near the door of the motorhome or caravan.
Control and
switch panel
DT 220 B
Solar control
LR ...
(accessory)
Electrobloc
EBL ...
-- +
Starter battery
--
Living area battery
Fig. 1 Onboard power supply system
The control and switch panel includes:
A background-illuminated display with excellent contrast
F
A control that switches the 12 V supply and the battery isolator on and off
F
Operating control for selecting the different menus
F
Operating control for setting up the parameters
F
Issued: 30.06.2006
+
230 V AC
Lighting
Pump
Heater
etc.
12 V consumer
3