The main layout of the on-board vehicle electrical system is shown in Fig. 1. Function The functions of the LT 100 control panel is to switch on and off the 12V supply to the caravan, and to display the battery voltage, the tank levels and the connection to the mains supply (230 V).
Operating Instructions Operator and control panel LT 100 Operation Layout The LT 100 control panel is intended for installation in a cabinet or wall. Fig. 2 Layout of LT 100 control panel Touch sensor Displays LED mains indicator (yellow): The LED lights up when mains voltage is pre-...
Operating Instructions Operator and control panel LT 100 Starting up Switch on the LT 100 control panel (see Section 3.3). " 230V mains operation Connect the input to the mains supply of the vehicle to the 230V mains " supply.
Page 5
Operating Instructions Operator and control panel LT 100 Battery voltage Battery operation Mobile operation Mains operation 12,2V to 12.7V Normal range No charging by the No charging by the alternator EBL... /CSV ... power supply 12V power supply 12V power supply...
Operating Instructions Operator and control panel LT 100 Checking tank levels Touch Check tank level sensor: " -- Water or -- Waste water The level of the relevant tank is displayed: -- Water: 100%, 75%, 50%, 25%; The tank is empty if the 25% LED flashes.
In this case, you must ensure that the warranty is not invalidated by incorrect repairs being carried out. Schaudt GmbH will not accept any liability for damage resulting from such repairs. Fault...
Operating Instructions Operator and control panel LT 100 Closing down the system The system should be switched off if the vehicle is not being used for a leng- thy period, such as during the winter. Disconnect the leisure area battery from the 12V on-board supply; to do "...
Wiring diagram for LT 100 control panel EC Declaration of Conformity Schaudt GmbH hereby confirms that the design of the LT 100 control panel complies with relevant regulations. The original EC declaration of conformity is available for reference at any time.
Page 10
Operating Instructions Operator and control panel LT 100 Customer service Customer service Schaudt GmbH, Elektrotechnik & Apparatebau Planckstraße 8 88677 Markdorf, Germany Phone: +49 7544 9577-16 Email: kundendienst@schaudt-gmbh.de Web: www.schaudt-gmbh.de Send in device Returning a faulty device: Complete and enclose the fault report, see Appendix D.