Display Menus - Schaudt DT 220 B Instruction Manual

5.4.2.6
5.5.1
830.588 BA / EN
DT 220 B control and switch panel instruction manual
Switching EisEx-facility on and off
This function is only available if a Truma Duomatic L Plus or Truma Trio-
Y
matic is fitted in the vehicle.
Press the "Main menu" button.
The display is lit up.
F
The time and possibly other symbols are displayed.
F
Press the menu button "Settings" and hold down for 3 seconds.
The display switches to programming mode for the main menu. The
F
current setting of the EisEx is shown, e.g. "AUTO".
The settings can be changed with the "+" and "----" buttons:
"OFF": The EisEx is switched off.
F
"ON": The EisEx is switched on.
F
"AUTO": The EisEx is automatically switched on at temperatures be-
F
low 7.5 °C and then automatically switched off at temperatures above
7.5 °C.
Confirm the entry with the "OK" button. If necessary, continue program-
ming.
When you have made all entries, press the menu button "Main menu".
The display is lit up.
F
The main menu is displayed.
F
5.5

Display menus

Main menu
The main menu showing time will be displayed automatically every 20 s
Y
after the last button was pressed.
Press the "Main menu" button.
The display will illuminate.
F
The time and other symbols (if required) will be displayed.
F
Press the "Main menu" button several times again (provided that the dis-
play is still lit).
The display will remain illuminated.
F
The following information will be displayed sequentially:
F
-- Internal temperature (display range: --40 °C to +60 °C)
-- External temperature (display range: --40 °C to +60 °C)
-- Date (day, month)
The "+" button can also be used to move forward to the next page. Use
the "--" button to return to the previous page.
You can use the "OK" button on both temperature display pages to switch
Y
between "°C" for centigrade and "°F" for fahrenheit.
Issued: 30.06.2006
15