Schaudt DT 220 B Instruction Manual page 16

DT 220 B control and switch panel instruction manual
5.5.2.1
16
5.5.2 Battery menu
Press the "Battery menu" button.
The display will illuminate.
F
The remaining utilisable leisure battery capacity will now be displayed.
F
Press the "Battery menu" button several times again (provided that the
display is still lit).
The display will remain illuminated.
F
The following information will be displayed sequentially:
F
-- Charging current for the leisure battery from the Electrobloc
-- Leisure battery voltage
-- Starter battery voltage
-- Solar control charging current for the leisure battery*
-- Solar control charging current for the starter battery*
*
Y
The solar charging functions are only available if the relevant fittings
(solar control and solar cells) are connected up to the EBL ... Electrobloc
and the "Read solar current" option is active. Only the vehicle manufactu-
rer can activate it at a later date.
The "+" button can also be used to move forward to the next page. Use
the "--" button to return to the previous page.
The "OK" button can be used in the utilisable leisure battery capacity
Y
page to move between the absolute value (in Ah) and the % entry.
Battery current
The battery display works in conjunction with the Electrobloc and takes into
account all types of battery charging:
From the Electrobloc via the 230 V power supply
F
From vehicle via the alternator whilst driving
F
From solar control (if fitted) via the solar module
F
From the fuel cell (if available)
F
The starter battery is loaded from the charger unit with max. 6 A. This
Y
charging current for trickle charging is not shown on the control and
switch panel.
Issued: 30.06.2006 830.588 BA / EN