Schaudt DT 220 B Instruction Manual page 12

DT 220 B control and switch panel instruction manual
5.4.2.2
12
Use the "+" or "--" buttons to set the year.
Confirm the entry by pressing "OK".
Press the "Set up" menu button.
The day display flashes.
F
Use the "+" or "--" buttons to set the day.
Confirm the entry by pressing "OK".
The month display flashes.
F
Use the same procedure to set the month.
Press the "Main menu" button when you have completed all of the
entries.
The display will remain illuminated.
F
The main menu is now displayed.
F
Set up the installed (nominal) battery capacity for the lei-
sure battery
Press the "Battery menu" button.
The display will illuminate.
F
The remaining utilisable leisure battery capacity will now be displayed.
F
Press the "Set up" menu button and keep it held down for at least 3 s.
The display will change over to battery menu set up mode.
F
The maximum utilisable leisure battery capacity will now be displayed.
F
The system uses the "installed (nominal) battery capacity" to calculate
this value.
Now press the "Set up" menu button once again as long as the display is
lit up.
The installed (nominal) leisure battery capacity display will flash.
F
Issued: 30.06.2006 830.588 BA / EN