Appendix - Schaudt DT 220 B Instruction Manual

Manufacturer
Address
Rod type tank probes
Capacitance probes
Tank sensors
Mixed operation
Customer service
address
Sending in the device
830.588 BA / EN
DT 220 B control and switch panel instruction manual

Appendix

A EU Conformity Declaration
Schaudt GmbH hereby confirms that the DT 220 B control and switch panel
design complies with the following relevant regulations:
Directive on electromagnetic compatibility
72/245/EEC with 95/54/EC Appendix 1
This declaration is based on:
Model approval issued by the Federal Transport Authority
Model approval No.:
EU Approval sign:
The original EU conformity declaration is available and can be referred to at
any time.
Schaudt GmbH, Elektrotechnik & Apparatebau
Daimlerstraße 5
88677 Markdorf
Germany
B Special fittings/Accessories
Per tank:
1 x tank probe (rod), 1 x seal
1 x locking nut, 1 x probe cable 5 x 0.5 (optional extras)
Alternative (per tank):
1 x capacitance tank probe for infinitely variable display of the level in the
water tank
Alternative (per tank):
5 x tank sensor, 1 x sensor cable 5 x 0.5
It is also possible to operate tank probes and tank sensors together.
C Customer service
Schaudt GmbH, Elektrotechnik & Apparatebau
Daimlerstraße 5
88677 Markdorf, Germany
Phone: +49 7544 9577-16 Email: kundendienst@schaudt-gmbh.de
Opening hours Mon to Thur
Fri
Returning a defective device:
Always use well-padded packaging.
Determining the software version (see Chapter 5.6.3).
Issued: 30.06.2006
e1*72/245*95/54*2762*04
e1 022762
08:00 -- 12:00, 13:00 -- 16:00 hours
08:00 -- 12:00 hours
27