Schaudt DT 220 B Instruction Manual page 28

DT 220 B control and switch panel instruction manual
28
Fill out and enclose the fault report; see Appendix D.
Send it to the addressee delivered free.
The switch panel must be transported in the ESD protective bag as supplied
by us. There are components fitted on the control and switch panel PCB that
can be destroyed by an electrostatic discharge (ESD). Do not touch the
components fitted on the PCB. A suitable bag can be ordered from Schaudt
GmbH if you do not have one available.
Issued: 30.06.2006 830.588 BA / EN