Schaudt DT 220 B Instruction Manual page 20

DT 220 B control and switch panel instruction manual
Tank monitor
20
5.5.3 Tank menu
Press the "Tank menu" button.
The display will illuminate.
F
The water tank filling level is now displayed.
F
Press the "Tank menu" button several times again (provided that the dis-
play is still lit).
The display will remain illuminated.
F
The following information will be displayed sequentially:
F
-- Waste water tank filling level
-- Extra tank filling level*
*
Y
The extra tank filling level display is only available if the relevant fitting
(water tank 2, waste water tank 2 or sewage tank) exists and "Extra
tank 2 -- waste water", "Extra tank 2 -- sewage" or "Extra tank 2 -- water"
is active. Only the vehicle manufacturer can activate it at a later date.
The "+" button can also be used to move forward to the next page. Use
the "--" button to return to the previous page.
The tank monitor automatically checks the water and waste water filling
levels once a minute or when changing to the tank menu.
An alarm will be triggered if the water tank is empty or the waste water tank
is full. Warnings will be displayed on the screen (see Chapter 5.6 "Alarms").
Monitoring no longer takes place if the 12 V power supply is switched off
Y
and whilst driving. This prevents false tank alarms from being generated
by the liquid slopping around inside the tank.
Issued: 30.06.2006 830.588 BA / EN