Table of Contents
Advertisement
3.6.9
Main Unit Settings
You can configure the following tray, film type and size, and sorter settings.
Setting
Tray Use
Select whether to use each tray.
Film Size
Select the film size.
8×10,10×12,11×14,14×14,14×17
(Settings [14x14] and [14x17] are not available when a mammography media tray is in-
stalled in supply tray 3.)
Film Type
Select the film type. B (BLUE), C (CLEAR), M (MAMMO)
(Settings [B] (Blue) and [C] (Clear) are not available when a mammography media tray is
installed in supply tray 3.)
Sorter Use
Select whether to use the sorter. This is not displayed when the sorter is not installed.
1
Enable maintenance mode.
"3.6.1 Enabling and Using Maintenance Mode" (page 54)
2
Use the [Test print] and [Calibration] buttons to move the cursor to the [Main
Unit Settings] icon
3
The following message appears in the display window�
. Press the [Service/Enter] button to select the item.
Tray Use
Sorter Use
Film Size
Film Type
65
Maintenance Mode
Meaning
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
Advertisement
Table of Contents
