Table of Contents
Advertisement
B Test Print Check List
Visual Check of QC Pattern (Items to be Checked:
[Image appearance]
(1) "Geometric pattern" as shown is
printed
(2) "Alphabetic/numeric characters" can
be properly identified
● None following thing was created on all
or part of the film image
(3) "Speckle noise"
(4) "Horizontal stripe"
(5) "Vertical stripe"
(6) "Serious image distortion"
(7) "Image wear"
(8) Other "image anomalies"
Density Check (Items to be Checked:
When checking from the display window on the operation panel
• Current Status View
• QC History View
"5.2 Operation of Test Print" (page 103)
(1)
and
)
(11)
(12)
(11) "Dens. Error <Perform Calibration>"
is not displayed on the DRYPRO
873 operation panel
(12)
"
of the
rect density value (three digits) is
displayed in the QC View
118
t o
)
(10)
[Resolution check]
● Check that thin line is resolved us-
ing a magnifying glass
(9) Horizontal thin line (upper)
(10)
Vertical thin line (lower)
* Instead of checking with a magnify-
ing glass, if the density is "1 (left)" <
"2 (middle)" < "3 (right)", it is judged
as being "OK"
NG " is not displayed in
1" to
"
QC history " and the cor-
"
4 "
"
Advertisement
Table of Contents
