Table of Contents
Advertisement
Maintenance Mode
3.6.2
Maintenance Menu
Maintenance mode consists of the following menus.
Icon
Standby Mode
Film Processing
Amount
QC
Error History
Roller Cleaning
Password
System Reset
Main Unit Settings
Current Date & Time Sets the date and time for the main unit and connected PC. The date can be
Sleep Mode Setting
Network Information
Service Information
3.6.3
Standby Mode
In standby mode, the warm-up time of the main unit is shortened and the power of the connected PC
is turned off.
This menu item may not be available depending on the setting of PC.
1
Enable maintenance mode.
2
Use the [Test print] and [Calibration] buttons to move the cursor to the
[Standby Mode] icon
item�
Item
Enables standby mode. In standby mode, the warm-up time of the main unit
is shortened and the power of the connected PC is turned off.
This menu item may not be available (the icon is grayed out) depending on
the setting of PC.
Displays the cumulative data of the film currently being used.
You can view the data on a daily, weekly, or monthly basis for each film size
and type.
Displays the output results for the QC patterns.
Displays the results for the last three QC patterns.
The history can also be deleted.
Displays the error codes for errors that occurred.
Performs roller cleaning. This menu item may not be available (the icon is
grayed out) when the mammography media expansion tray is not installed in
Tray 3 (expansion tray). The icon blinks when the set time has passed since
the last roller cleaning.
Displays the screen in which a password is entered.
Clears all queued jobs and restarts the main unit.
Lets you configure the tray, film, and sorter settings.
set up to December 31, 2037.
(The date and time setting may not be available depending on the setting of
your computer.)
Lets you configure the sleep mode setting of the main unit.
Displays the network information for the main unit and connected PC.
Displays the serial number, running time, total number of output sheets, and
version information of the main unit.
"3.6.1 Enabling and Using Maintenance Mode" (page 54)
. Press the [Service/Enter] button to select the
Meaning
56
Advertisement
Table of Contents
