Table of Contents
Advertisement
Error Type
Display Message Example
E error
E4A21:<Error message>
Close the cover
E4A22,E4A24:<Error message>
Close the cover
E4A23:<Error message>
Close the cover
Exxxx: <Error message>
Press Reset button
E9211: <Error message>
Press Reset button
F error
Fxxxx: <Error message>
Turn OFF the power
F8700: <Error message>
Reboot the PC referring to the manual
Fxxxx: <Error message>
PC Application Error
Note: "xxxx" indicates the notation in hexadecimal (0 to 9 or A to F).
Description
of Error
The top
Close the top right cover.
right cover
is opened
during
operation.
The lower
Close the lower right cover.
right cover
is opened
during
operation.
The sorter
Close the sorter cover.
cover is
opened
during
operation.
Check the error description, perform the
Error other
than film
suggested solution, and then press the
jam
[Reset/Cancel] button.
"4.4.1 Reset from Operation Panel"
(page 82)
The entered
A film size/type input image that differs from
image film
the main unit settings was specified. Check
size/type
is incor-
the film size/type settings for the input
rect (oc-
curs when
destination modality, and press the [Reset/
an item
Cancel] button.
in queue
remains
"4.4.1 Reset from Operation Panel"
and the film
(page 82)
size or type
is changed
on the main
unit opera-
tion panel.)
Internal
Press the operation switch until a beep
error
sounds (approximately one second) and
shut down this machine. Check that the
machine has been shut down and then
press and hold the operation switch until a
beep sounds (approximately one second), to
restart the machine.
"4.4.1 Reset from Operation Panel"
(page 82)
There may
Take the action described in " When an
be a prob-
F8700 Error Occurs" (page 83).
lem with
PC.
There may
Take the action described in " When a PC Ap-
be a prob-
plication Error Occurs" (page 83).
lem with
PC.
81
Error Display and Solutions
Solutions
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
Advertisement
Table of Contents
