Table of Contents
Advertisement
DRYPRO MODEL 873 Test Print Check List
Date and time of
implementation
Name of a Person
in Charge
Item-
Num-
Category
ber
(1)
"Geometric pattern" is printed
(2)
Alphabetic/numeric characters on the film image can be
properly identified
(3)
No "speckle noise" was created on all or part of the film image
(4)
No "horizontal stripe" was created on all or part of the
Image
film image
appearance
(5)
No "vertical stripe" was created on all or part of the
film image
(6)
No "serious image distortion" was created on all or part of
the film image
(7)
No "image wear" was created on all or part of the film image
(8)
No "image anomaly" other than items in (3) to (7) occurred on
all or part of the film image
(9)
The "horizontal thin line" of QC pattern appears to be resolved
(Use of a magnifying glass)
Resolution
(10)
The "vertical thin line" of QC pattern appears to be resolved
(Use of a magnifying glass)
(11)
After printing the QC pattern, the calibration icon and mes-
sage are not displayed on the DRYPRO 873 operation panel
(12)
After printing the QC pattern, "NG" is not displayed in "1" to "4" of
the "QC results" in the QC window on the DRYPRO 873 operation
Density
panel, but the correct density value (two to three digits) is displayed
If the first total judgment shows "NG", print the QC pattern again after performing calibration and recheck. If the total
judgment is "NG" again on rechecking, contact Konica Minolta technical representatives.
* Enter "OK" or "NG" in the "Judgment" column and density value in "(
Year
Month Day (
) :
Item to be Checked
119
Test Print Check List
Main Unit
Name
Tray
Tray 1/Tray 2/Tray 3
Judgment
1st
1:(
)
2:(
)
3:(
)
4:(
)
Total judgment
1
)"
2
*
3
Recheck
4
5
7
8
1:(
)
2:(
)
3:(
)
9
4:(
)
1 0
1 1
1 2
Advertisement
Table of Contents
