Table of Contents
Advertisement
Check that the tray button for the loaded tray is lit before pulling
out the package (barrier bag).
When pulling out the package (barrier bag),
care should be taken not to pull it out at a
slant. Otherwise the package (barrier bag)
may not be pulled out�
When "Ready" appears in the display window, the machine is ready to print. A sheet of film printed with
the calibration pattern for automatic density correction is output when the first print job is received after
film has been loaded and when warm-up is completed due to the settings.
Refer to "4.2 How to Resolve Film Loading Error" (page 79) when the following erroneous operation
is performed.
• Closed the tray without pulling out the forward end of the package (barrier bag).
• Closed the tray without cutting off the back of the package (barrier bag) with a cutter.
• Closed the tray without installing films.
"4.2 How to Resolve Film Loading Error" (page 79)
49
Loading Films
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
Advertisement
Table of Contents
