Troubleshooting; General Notes; Technical Specifications - Kärcher WD 7.0 Series Manual

Clean flat fold filter
Illustration

Release and open the filter flap. Remove
the frame and filter and knock the dirt out
of the filter. Clean the filter under running
water if necessary. Do not rub or brush the
filter dry.
Let it dry completely prior to installation.
Illustration

After that, insert the filter first and then the
frame.

Troubleshooting

Water is leaking

Turn off the appliance immediately.
Illustration

Clean the floater system.
Remove the appliance head, unscrew the
floater basket (A) in the direction of the ar-
row and remove it. Remove the floater (B)
and clean both under flowing water.
If necessary, also clean the cover for the
floater valve (C): For this, release and re-
move the cover. Reattach after the clean-
ing process and lock it (observe the
markings and symbols).
To install, first insert the floater, then add
the floater basket and lock it.
Decreasing cleaning power
If the suction power becomes less, check the
following points:

Accessories, suction hose or suction
tubes are clogged, please remove the ob-
struction.

Flat fold filter contaminated: Remove the
filter and clean it (see chapter "Cleaning
the flat fold filter").

Replace damaged flat folded filter.

Filter bag is full: Insert new filter bag (Or-
der No. refer to spare parts list at the end
of this manual).
Caution
Please do not dispose of the filter bag intake!
12
The terms of the guarantee applicable in each
country have been published by our respec-
tive national distributors. We will repair possi-
ble faults on your unit free of charge within the
warranty period, insofar as the faults are
caused by material defects or defective work-
manship. Guarantee claims should be ad-
dressed to your dealer or the nearest
authorized customer service centre, and sup-
ported by documentary evidence of purchase.
(See address on the reverse)
Customer Service
Our KÄRCHER branch will be pleased to help
you further in the case of questions or faults.
(See address on the reverse)
Ordering spare parts and special
At the end of the operating instructions you
will find a selected list of spare parts that are
often required.
You can procure the spare parts and the at-
tachments from your dealer or your
KÄRCHER branch office.
(See address on the reverse)

Technical specifications

Voltage
1~50/60 Hz
Output P
nom
Output P
max
Mains fuse (slow-blow)
Container capacity
Water intake with handle
Water intake with floor noz-
zle
Sound pressure level
(EN 60704-2-1)
Weight (without accesso-
ries)
Subject to technical modifications!
– 4
EN

General notes

Warranty
attachments
220 - 240
1000
1200
10
18
12
9
73
8,3
V
W
W
A
l
l
l
dB(A)
kg