Wrs 200 Device Overview - Kärcher WRS 200 Manual

Care and service
WARNING Always switch the device off prior to cleaning,
maintenance and replacement of parts. Depressurise the high-
pressure system prior to all work on the device or its accessories.
CAUTION Repairs may only be carried out by approved
customer service sites or staff qualified in this area who are famil-
iar with all relevant safety instructions.
ATTENTION Pay attention to the safety inspection for mobile
devices for industrial use in accordance with the locally applica-
ble regulations Short-circuits or other damage. Do not clean the
device with a hose or high-pressure water jet. Do not use ace-
Burner sight glass
1
Battery
2
Detergent dosing pump
3
Detergent container
4
Water filter
5
Fuel canister
6
High-pressure hose storage compartment
7
Control panel
8
18
tone, undiluted acids or solvents, as they corrode the materials
used on the device.
CAUTION Only use accessories and spare parts which are
approved by the manufacturer. Only original accessories and
original spare parts ensure that the appliance will run fault-free
and safely. Only have repairs and installation of spare parts
performed by the approved Customer Service in order to prevent
any hazards.

WRS 200 device overview

Burner blower
9
Pressure control
10
Filler opening lid
11
High-pressure pump
12
Oil level sight glass
13
Note
Please note: All types of fuel are simply referred to as "fuel" in
these operating instructions.
English
Accessories and spare parts