Objectives; Audience; Related Documentation - Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Manual

Chapter
Chapter 4, "Installing the Internet Streamer CDS
Software and Initially Configuring a CDE"
Chapter 5, "Hardware Troubleshooting"
Appendix A, "Technical Specifications"
Appendix B, "Connector Pin Assignments"
Appendix C, "CDEs with Serverworks Chipset"
Appendix D, "Connecting DC Power"

Objectives

This guide documents the hardware features of the Cisco Content Delivery System (CDS) Release
2.0-2.1, which consists of the CDE100, CDE200, CDE300 and CDE400 when used in Internet Streamer
and TV applications. It describes the physical and performance characteristics of each Content Delivery
Engine (CDE), explains how to install a CDE, and provides troubleshooting information.
This guide does not describe system messages that you may receive and provides only initial
configuration procedures. For more information, see the

Audience

This guide is for the networking or computer technician responsible for installing the Cisco CDS
hardware. You should be familiar with the concepts and terminology of Ethernet and local area
networking.

Related Documentation

These documents provide complete information about the CDS and are available from the Cisco.com
site:
•
•
•
•
•
•
•
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
viii
Release Notes for the Cisco Internet Streamer CDS 2.0
Release Notes for the Cisco Internet Streamer CDS 2.1
Cisco Internet Streamer CDS 2.0-2.1 Software Configuration Guide
Cisco Internet Streamer CDS 2.0-2.1 Quick Start Guide
Cisco Internet Streamer CDS 2.0-2.1 API Guide
Cisco Content Delivery System 2.x Documentation Roadmap
Regulatory Compliance and Safety Information for the Cisco Content Delivery Engine
100/200/300/400
Description
Describes the initial installation of the CDS
Release 2.0-2.1 software application onto the
CDEs, and the initial configuration of the CDEs
using the Content Delivery System Manager
(CDSM).
Presents troubleshooting procedures for the CDS.
Describes the specifications of the CDEs.
Lists the connector pin assignments for the CDEs.
Describes the specifications and connector pin
assignments of the servers with the Serverworks
chipset.
Provides the information for connecting DC
power to a CDE.
"Related Documentation" section on page
Preface
viii.
OL-13478-03