Appendix; Connector Pin Assignments; Serial Console Interface Connector Pin Assignments - Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Manual

Connector Pin Assignments

This appendix lists the connector pin assignments for the CDEs. This appendix includes the following
sections:
•
•
•
Note This appendix only provides information on CDEs that were shipped after December 1, 2006 and contain
the Lindenhurst chipset. For information on CDEs that were shipped before December 1, 2006 and
contain the Serverworks chipset, see

Serial Console Interface Connector Pin Assignments

The serial console interface connector is a 9-pin, RS-232 D-type, DTE connector. A null modem cable
is required to connect a workstation running the Linux or Windows operating system.
pin assignments for the serial console interface connector.
Table B-1
Description
Data carrier detect; input
Receive data; input
Transmit data; output
Data terminal ready; output
Interface signal ground
Data set ready; input
Ready to send; output
Clear to send; input
Ring indicator; input
OL-13478-03
Serial Console Interface Connector Pin Assignments, page B-1
Ethernet Connector Pin Assignments, page B-2
Cable Pin Assignments, page B-4
RS-232 Connector Pin Assignments
A P P E N D I X
Appendix C, "CDEs with Serverworks Chipset."
Pin I/O
1 In
2 In
3 Out
4 Out
5 –
6 In
7 Out
8 In
9 In
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
B
Table B-1
Signal Name
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
lists the
B-1