Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Manual page 69

Chapter 4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE
From the CDSM Main menu, select the Devices tab. A list of all your registered Service Engines and
Step 3
Service Routers appears (see
Figure 4-20
Verify that the devices you configured for your CDS network are listed.
Step 4
If a device is not listed, restart the CMS for that device by using either the console or Telnet connection
Step 5
and entering the following commands in global configuration mode:
CDE(config)# no cms enable
CDE(config)# cms enable
The installation is now complete. Refer to the Cisco Internet Streamer CDS 2.0-2.1 Software
Configuration Guide for information on configuring and using the CDS. See the
Documentation" section on page
OL-13478-03
Figure 4-20).
Devices Page
2-viii.
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
Verifying the CDSM
"Related
4-17