Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Manual page 58

Running the BIOS Setup Utility
Figure 4-6
Choose IDE Configuration and press Enter. The IDE Configuration screen appears (see
Step 11
Figure 4-7
Set the IDE Configuration option to P-ATA Only.
a.
Set the S-ATA Running Enhanced Mode option to No.
b.
Set the P-ATA Channel Selection option to Both.
c.
Note
Press Esc to return to the Advanced menu. Choose Super I/O Configuration and press Enter. The
Step 12
Configure Super I/O Chipset screen appears (see
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
4-6
Chapter 4
Advanced Settings Menu
IDE Configuration Screen
On the CDE100, the Primary IDE Slave is connected to the internal CD-ROM drive, the
Secondary IDE Master is connected to a 128-MB compact flash drive.
Installing the Internet Streamer CDS Software and Initially Configuring a CDE
Figure 4-8).
Figure 4-7).
OL-13478-03