Table of Contents
Advertisement
Operation & Maintenance Manual
Prior to Starting
1. Place the unit in a position that is as level as possible. The design of the unit
permits a 15 degree lengthways and sideways limit on out of level operation.
When the unit has to be operated out of level, it is important to keep the engine
oil level near the high level mark (with the unit level).
2. Check the engine lubrication oil in accordance with the operating instructions
in the Engine Operator's Manual or section.
3. Check the compressor oil level in the sight tube located on the separator tank.
The most accurate reading can be made before the machine is started with the
unit level, engine off, and zero pressure in the separator tank.
4. Check the diesel fuel level. A good rule is to top up at the end of each working
day. This prevents condensation from occurring in the tank. Refer to the engine
operator's manual/section for diesel fuel specification.
When refueling:-
•
•
•
•
•
38
!
switch off the engine.
do not smoke.
extinguish all naked lights.
do not allow the fuel to come into contact with hot surfaces.
wear personal protective equipment.
CAUTION
Operating Instructions
Book 22826226
Advertisement
Table of Contents
