Chapter 5
Customizing Your Configuration
Figure 5-2
Table 5-5
detail. Repeat for each RemoteServer you want to configure.
Table 5-5
Object
RemoteServers
Services
Scripts
Radius
Configuring Two Remote Servers
Configure each remote server you want to use for authentication and authorization. The following
example shows the
Creating RemoteServers
Step 1
Run the aregcmd command:
Use the cd command to change to the RemoteServers level:
Step 2
Use the add command to add the remote server you specified in the Services level. The following
Step 3
example adds the
OL-17221-02
Using a Script to Choose a Remote Server
Scripts
Request
Choose
service
provides an overview of the process. The following sections describe the process in more
Configuring Multiple Remote Servers
Action
Add a new RemoteServer.
Set the protocol (radius).
Set the shared secret.
Add a new Service.
Set the type (radius).
Set the remote server name and number.
Add a new Script.
Set the IncomingScript.
remote server.
North
aregcmd
cd /Radius/RemoteServers
remote server:
North
add North
Services
NorthUsers-radius
SouthUsers-radius
Installing and Configuring Cisco Access Registrar, 4.2
Configuring a Remote Server for AA
Remote
Servers
North
North2
South
5-13