Installing Cisco Access Registrar Software From Cd-Rom - Cisco Access Registrar 4.2 Installation And Configuration Manual
Cisco systems network device installation and configuration guide
Hide thumbs
Also See for Cisco Access Registrar 4.2:
- Configuring network settings (34 pages) ,
- Administrator's manual (151 pages) ,
- Getting started manual (46 pages)
Table of Contents
Advertisement
Upgrading Cisco Access Registrar Linux Software
Step 3
Run the uninstall-ar program as shown below:
Enter Yes or Y to continue removing the Linux software.
Step 4
Deciding Where to Install
Before you begin the software installation, you should decide where you want to install the new software.
The default installation directory for CAR 4.2 software is /opt/CSCOar. You can use the default
installation directory, or you can choose to install the Cisco AR software in a different directory.
Installing Cisco Access Registrar Software from CD-ROM
The following steps describe how to begin the software installation process when installing software
from the CAR 4.2 CD-ROM. If you are installing downloaded software, proceed to
Downloaded
Place the CAR 4.2 software CD-ROM in the Cisco AR workstation CD-ROM drive.
Step 1
Log in to the Cisco AR workstation as a root user and find a temporary directory, such as /tmp, to store
Step 2
the Linux installation file.
The temporary directory requires at least 1GB of free space.
Note
Change directory to the CD-ROM.
Step 3
Copy the CSCOar-4.2.1-lnx26-install-k9.sh file to the temporary directory.
Step 4
Installing and Configuring Cisco Access Registrar, 4.2
3-14
cd /opt/CSCOar/bin
arserver stop
Waiting for these processes to die (this may take some time):
AR RADIUS server running
AR Server Agent running
AR MCD lock manager running
AR MCD server running
AR GUI running
5 processes left.2 processes left.0 processes left
Access Registrar Server Agent shutdown complete.
uninstall-ar
Are you sure you want to remove CSCOar-3.5.4-1101360135? [y/n]:
Are you sure you want to remove CSCOar-3.5.4-1101360135? [y/n]: y
Nothing running, no need to shutdown.
host root bin###
Software.
cd /cdrom/cdrom0/kit/linux-2.6
cp CSCOar-4.2.1-lnx26-install-k9.sh /tmp
Chapter 3
(pid: 1403)
(pid: 29310)
(pid: 29320)
(pid: 29317)
(pid: 29441)
Upgrading Cisco Access Registrar Software
Installing
OL-17221-02
Advertisement
Table of Contents
