Removing Old Vsa Names; Vsa Update Script - Cisco Access Registrar 4.2 Installation And Configuration Manual

Upgrading Cisco Access Registrar Solaris Software

Removing Old VSA Names

The upgrade process provides an analysis of the configuration database, addition of new database
elements, and a search for obsolete VSA names. When this is complete, a message like the following is
displayed:
At this point, you should examine the script produced by the upgrade process to make sure that your site
is not using any of the old VSAs. In the example above, the script can be found at
/opt/CSCOar/temp/10062.manual-deletes.
The number preceding manual.deletes is produced from the PID of the upgrade process.
Note
Modify your configuration and your scripts to use the new names before you attempt to run the script
generated by the upgrade process.

VSA Update Script

The upgrade process builds a script you can use to update VSAs in your system.
Installing and Configuring Cisco Access Registrar, 4.2
3-12
###############################################################
#
# A backup copy of your original configuration has been
# saved to the file:
#
# /opt/CSCOar/temp/10062.origconfig-backup
#
# If you need to restore the original configuration,
# enter the following command:
#
# mcdadmin -coi /opt/CSCOar/temp/10062.origconfig-backup
#
###############################################################
##############################################################
#
# Sometimes VSAs get renamed from version to version of AR.
# The upgrade process does not automatically remove the
# old names. The upgrade process has generated a script
# to remove the old names. The script is located in:
#
# /opt/CSCOar/temp/10062.manual-deletes
#
# Review the script to make sure you are not using any of
# these old VSAs. Modify your configuration and your
# scripts to use the new names before you attempt to run
# the script.
#
# To run the removal script, type:
#
# aregcmd -sf /opt/CSCOar/temp/10062.manual-deletes
#
##############################################################
##############################################################
#
# VSAs for the old AR version are not updated
# automatically. The upgrade process generated a script
Chapter 3 Upgrading Cisco Access Registrar Software
OL-17221-02