Sullair 600H User Manual page 79

SECTION 5
1. Capscrew
2. Washer
3. Upper Housing
4. O-Ring
the actuating block mounted on the actuation arm.
CAUTION
POTENTIAL ASBESTOS DUST HAZARD!
Some older brake linings may contain
asbestos dust, which has been linked to
serious or fatal illnesses. Certain precau-
tions need to be taken when servicing
brakes:
1. Avoid creating or breathing dust.
2. Avoid machining, filing or grinding the
brake linings.
3. Do not use compressed air or dry
brushing for cleaning (dust can be
removed with a damp brush).
600H, 700HH, 750, 750H, 750HH, 825, 900H, 1050 USER MANUAL
3
4
5
6
7
8
Figure 5-2: Main Fluid Filter Assembly and Thermostat
1
2
5. Thermostat Element*
6. O-Ring
7. Lower Housing
8. Filter Elements **
CAUTION
Do not get grease or oil on the brake linings,
drums or magnets.
W B L
HEEL EARING UBRICATION
Refer to Figure 5-4. Proper lubrication is essential to
the proper functioning and reliability of your portable
compressor axle. The wheel bearings are lubricated
through the use of a oil-bath. See Table 5-1 for
company approved oil sources. Oil level should be
checked every month. The oil can be filled through
the rubber plugged hole in the clear end cap. Oil
should be replaced every year or 12,000 miles,
79