ComAp InteliDrive Lite Global Manual page 190

Speed Sel1
Related FW 2.5.0
Comm object 710
Description
If the input is active, the Speed request =
RetToSpeedAdj (page
Note: See Speed request chart (page
6 back to List of LBI
Speed Sel2
Related FW 2.5.0
Comm object 711
Description
If the input is active, the
an ECU engine. The Speed Request value may also depend on the conditions which are described in the
chapter below.
Note: See Speed request chart (page
6 back to List of LBI
Speed Sel3
Related FW 2.5.0
Comm object 712
Description
If the input is active, the
an ECU engine. The Speed Request value may also depend on the conditions which are described in the
chapter below.
Note: RetToSpeedAdj (page 120)
edge (button press), i.e. input can be opened and Speed request stay constant.
Note: RetToSpeedAdj (page 120)
(switch), i.e. when input is opened Speed request go back to
Note: SpeedSel1, 2,.3 binary inputs are active only when
Note: When more binary inputs are active at the same time, e.g. all binary inputs: 'Speed Sel1', 'Speed
Sel2', 'Speed Sel3' then requested speed is given by
setpoint.
Note: See Speed request chart (page
6 back to List of LBI
ID-FLX Lite & Telecom Global Guide
Related applications
BI Speed Sel 1 (page
120).
61).
Related applications
BI Speed Sel 2 (page 122)
61).
Related applications
BI Speed Sel 3 (page 122)
= DISABLED, Speed request is adjusted by BI Speed Sel1, 2, 3
= ENABLED, Speed request is adjusted by BI Speed Sel1, 2, 3 level
61).
121). The function is affected by
may give the engine speed value for Speed request to
may give the engine speed value for Speed request to
ECU SpeedAdj (page 120)
LAI SpdRequest (page 126)
BI Speed Sel 1 (page 121)
level.
= OFF.
(lowest index)
190