Cisco 700 MHz Installation And Upgrade Manual page 57

Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Two MP-MA-4s are used for the IP configuration and are in slots 15 and 16, shown on the left.
For the T1 CAS configuration, there is a T1 Smart Blade in slot 1 and three Smart Blades in slots 2, 3,
and 4.
Figure 2-26
Figure 2-27
Cisco Unified MeetingPlace system with 23 T1 PRI ports and 120 IP ports.
The MP-MA-4 that is used for the IP configuration is shown on the left in slot 16 and the Multi Access
Blade MP-MA-4 that is used for the T1 PRI configuration is shown on the right in slot 1.
There is a Smart Blade in slot 2 where 23 ports are used for the T1 PRI configuration, and 73 ports are
used for the IP configuration. There is another Smart Blade in slot 3 to support the remaining 47 IP ports.
OL-13417-01
About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems
Back of Cisco Unified MeetingPlace 8112 (Mixed Configuration with 96 T1 CAS and
240 IP Ports)
shows the connections on the back of a Cisco Unified MeetingPlace 8112 with a mixed
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
2-33