Lan Requirements For Cisco Unified Meetingplace Systems - Cisco 700 MHz Installation And Upgrade Manual

LAN Requirements for Cisco Unified MeetingPlace Systems

Table 1-7
Country
Japan
European Union
LAN Requirements for Cisco Unified MeetingPlace Systems
To connect to other applications, such as MeetingTime and Cisco Unified MeetingPlace Web
Conferencing, Cisco Unified MeetingPlace Audio Server systems require certain TCP and User
Datagram Protocol (UDP) ports to remain open on your network.
Figure 1-4
Unless otherwise specified, all ports listed are TCP.
Figure 1-4 TCP/UDP Port Requirements
End user
scheduling via web,
Microsoft Outlook,
or IBM Lotus Notes
80
80 or 443(SSL) and 1627
1503 (NetMeeting)
End user in a
web conference
Ensure that the Cisco Unified MeetingPlace Audio Server system resides on a network segment that is
free from potential network problems, such as storms, loops, and collisions.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
1-12
Chapter 1
Modem Requirements by Country (continued)
Requirements
CE modem supplied by Cisco Systems.
•
Serial cable.
•
8.2-foot modem cable.
•
Customer-supplied standard analog phone jack (RJ-11). You must be able
•
to call the extension from the outside.
• Global modem supplied by Cisco Systems.
• Serial cable.
• Customer-supplied standard analog phone jack (RJ-11). You must be able
to call the extension from the outside.
illustrates the ports that a Cisco Unified MeetingPlace system uses for communication.
5001, 5003, 5005
Microsoft Windows NT
system with
Cisco Unified MeetingPlace
integration applications
Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware
Network
time protocol
server
UDP 123
5001, 5005
Cisco Unified MeetingPlace
Audio Server system
System manager
using MeetingTime
OL-13417-01